• <sub id="ukzt8"></sub>

  • 咨詢熱線: 13896006908

    Contact us 聯系我們

    重慶豐正機械有限公司

    聯系人:朱經理

    手機:13896006908

    電話:023-67188505

    傳真:023-67188506

    地址:重慶市渝北區回興工業園區蘭馨大道2號

    可調多軸器

    (重切削)U型系列可調多軸器

    (Heavy cutting)Type U multi-spindle tool

    ◎本體結構利用齒輪箱配合萬向節頭所組成,容易調整加工孔距不受齒輪所限制,節省調整的時間,也少有死角的限制。其齒輪、軸承、輸出軸、萬向節均采用強力系列,適合加工鋼件等強力場合。為保萬向節頭之壽命,移動范圍不得超過15度,等于垂直之前後左右30mm以內。

    (盡量配合工作之孔距坐標,設計齒輪箱結構即定鏜孔位)

    ◎The basic frame consists of gear case and cardan joint.The hole-distance is easy to control and will not be affected by the gears.The set up time is thus saved and it is mostly free of dead angles.It is very suitable for working of round holes.The gear.bearing.output shaft and cardan joint are all intensified,so it is good at machining hard parts such as steel parts.To ensure the lifetime of the cardan joint,the moving range should be confined within 15 degrees,which means within a distance of 30mm to the vertical status.

    (We will design the structure of gear case,that is,the position of the boring hole as much as possible according to the coordinate of per hole.)

    咨詢熱線:

    13896006908

    在線咨詢
    規格參數

    ※萬向節注意事項

    1.調整時不能超過規定的角度15度

    2.如超過此極限心軸易磨損或斷裂

    3.工作時應經常加潤滑油脂

    ※Note of cardan Joint

    1.Do not set the angle to more than the specifled l5 degrees.

    2.If the limit is exceeded,the shaft will be easy to wear or break.

    3.During work,lubrication should be added frequently.

    型號 Type

    SWU165

    SWU200

    SWU250

    SWU100×165

    SWU120×200

    SWU120×300

    筒夾規格Collet/

    最大鉆孔能力

    Max.Drilling Capacity

    ER20/13

    ER25/16

    ER20/13

    ER25/16

    ER20/13

    ER25/16

    ER20/13

    ER25/16

    ER20/13

    ER25/16

    ER20/13

    ER25/16

    轉速比

    Gear Ratio

    1∶1

    1∶1

    1∶1

    1∶1

    1∶1

    1∶1

    最小距離(二軸間)

    Lowest Distance(Two Spindle)

    42

    42

    42

    42

    42

    42

    最大軸心范圍

    Max.Range of Centers

    165

    200

    250

    100×165

    120×200

    120×300

    軸數

    Spindle

    2-10

    4-12

    4-12

    3-8

    4-12

    6-14

    掃一掃

    重慶豐正機械有限公司

    在線咨詢

    咨詢熱線:023-67188505

    QQ咨詢 QQ咨詢
    6080yy亚洲人久久精品|孕妇久久夜色精品国产爽爽|亚洲色婷婷久久99精品|HEYZO无码综合国产精品
  • <sub id="ukzt8"></sub>